Get a free quote
Get a free quote
Contact Us
post thumbnail

Blog, Technical

30% More Diesel Power Camshaft Grind

Below is the standard camshaft grind for a Toyota 2H. If you fit extractors to your existing 2h Toyota engine, with the Noordeman Sports grind camshaft, you can gain up to 30% more power.(Subject to engine life/kilometres and fuel system.) This grind will also suit turbo 2H engines.

 CMTO310 – Camshaft to Suit Toyota 2H

O.E. NUMBER:  13511-68010
  INLET EXHAUST
VALVE OPENS  º BTDC  º BBDC
VALVE CLOSES  º ABDC  º ATDC
LOBE SEPARATION ANGLE  º
BASE CIRCLE DIAMETERS 36.0 mm 36.1 mm
LOBE HEIGHT/LIFT 41.80 – 42.00 mm 42.20 – 42.40 mm
JOURNAL DIAMETERS
  1. 51.151 – 51.170 mm  2: 50.951 – 50.970 mm
  2. 50.751 – 50.770 mm  4: 50.551 – 50.570 mm
THRUST PLATE STEP WIDTH 7.06 – 7.10 mm
THRUST CLEARANCE 0.060 – 0.130 mm (Limit: 0.30 mm)
GEAR SPIGOT DIAMETER 34.015 – 34.040 mm
MATERIAL & HARDNESS SG Iron, induction hardened, 48 – 58 HRC
NOTE:

If you require your camshaft reground, modified or a linish contact us on the form below.

For more information on camshaft grinding click here 

Get in touch with us

We are here to help you get back on the road again. Make sure you fill in all sections of the form below so that we can get in touch with you about your request.

Get In Touch With Us

WANT TO STAY UP TO DATE?

Follow our socials to stay in the loop

Instagram Facebook